Reset items include both computer sources and Video source settings.
LAN S
ETTINGS
menu provides the following options:
WIRELESS AND LAN—
function.
DHCP—
connected, the IP address will automatically be acquired when you select
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,
and Gateway. Use
Mask, and Gateway. Key in enter to confirm each number and then use
and
IP A
DDRESS
projector connected to the network.
S
UBNET
G
ATEWAY
administrator if you configure it manually.
DNS—
administrator if you configure it manually.
S
TORE
settings.
50
Using Your Projector
Downloaded From projector-manual.com DELL Manuals
—
Select and press
Select Enabled to active the Wireless and LAN
If a DHCP server exists in the network to which the projector is
and
to set the next item.
—
Automatically or manually assigns the IP address to the
M
—
Configure the Subnet Mask of the network connection.
ASK
—
Check the Gateway address with your network/system
Check the DNS Server IP address with your network/system
—
Press
to save the changes made in network configuration
NOTE:
1. Use
and
Gateway, DNS, and Store.
2. Press the
button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
a
Use
and
b
Use
and
to activate LAN settings. The LAN settings
to select the number of IP address, Subnet
buttons to select IP Address, Subnet Mask,
buttons to select the option.
buttons to set the value.