Dell 4220 User Manual page 51

R
W
IRELESS
wireless settings menu provides the following options:
W
the wireless connection.
DHCP S
S
address of the DHCP server to the projector connected to the wireless.
E
the DHCP server to the projector connected to the wireless.
S
G
administrator if you configure it manually.
DNS—
administrator if you configure it manually.
S
settings.
Downloaded From projector-manual.com DELL Manuals
c After the setup is complete, press the
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up,
select Store and press
4. If you select Store without pressing the Enter button, the system will
keep the original settings.
—
Press to reset network configuration.
ESET
S —
Select and press
ETTINGS
—
Default option is Connected. Select Disconnected to disable
IRELESS
NOTE:
It is recommended to use the default settings for Wireless
Connect.
—
Allows you to enable DHCP server of the wireless.
ERVER
IP A —
TART DDRESS
IP A —
Automatically or manually assigns the End IP address of
ND DDRESS
M —
Configure the Subnet Mask of the wireless connection.
UBNET ASK
—
Check the Gateway address with your network/system
ATEWAY
Check the DNS Server IP address with your network/system
—
Press to save the changes made in wireless configuration
TORE
NOTE:
1. Use
and
Gateway, DNS, and Store.
button to store the settings.
to activate wireless settings. The
Automatically or manually assigns the Start IP
buttons to select IP Address, Subnet Mask,
button to exit.
Using Your Projector 51