EPSON PhotoPC-750Z
INSTALLING THE COVER TOP
4. Match 3 dimples of the Cover Top with the each notch on the SY1
board and fix them. At this time, since the shape of the rotary switch
on the SY1 board is "D"-cut shape, push in the Cover Top,
matching with the shape of the switch on the Cover Top.
Figure 4-26. Installing the Cover Top
Disassembly and Assembly
TEMPORAL TACKING THE COVER CF
5.Tack the "Cover CF" to the camera body by one screw (100)
temporarily. 5 screw holes can be found in the actual condition, but
2 of them are for tightening the front and rear cabinet together.
Figure 4-27. Tacking the Cover CF temporarily
Overview
Revision A
57