Installing Parts To The Ca1 Board (2); Connecting Boards - Epson Photo PC-750Z Service Manual

EPSON PhotoPC-750Z

4.1.5.7 Installing Parts to the CA1 Board (2)

1. Put the holder LCD on the back side of CA1 board and fix them by 2
screws (102) from the front side of CA1 board.
Figure 4-14. Parts Installation to the CA1 Board (2)
Disassembly and Assembly

4.1.5.8 Connecting Boards

CONNECTING THE CA2 AND ST1 BOARDS
1. Put the holder LCD on the back side of CA1 board and fix them by 2
screws (102) from the front side of CA1 board.
2. Connect CN501 on the ST1 board and CN104 on the CA2 board
firmly, matching the CA2 board and ST1 board with the notched part
for the lens.
Figure 4-15. Connecting the CA2 and ST1 Boards (1)
Overview
Revision A
51