Mounting; Requirements For Mounting The Sunny Home Manager - SMA sunny home manager Installation Manual

6 Mounting

6 Mounting
6.1 Requirements for Mounting the Sunny Home Manager
Requirements for the mounting location:
☐ The mounting location must be indoors.
☐ The mounting location must be protected against dust, moisture and corrosive substances.
☐ The cable route from the mounting location to the router must not exceed a maximum length
of 100 m.
☐ The cable route from the mounting location of the Sunny Home Manager to the energy
meters with D0 interface must not exceed a maximum length of 15 m.
☐ The cable route from the mounting location of the Sunny Home Manager to the energy
meters with S0 interface must not exceed a maximum length of 30 m.
☐ A minimum distance of 1 m must be maintained from devices using the 2.4 GHz radio
spectrum (e.g. WLAN devices, microwave ovens). This will prevent reduced connection
quality and data transmission speed.
☐ The Sunny Home Manager must not have radio shielding (e.g. in a metal cabinet).
☐ The ambient conditions at the mounting location must be suitable for the operation of the
Sunny Home Manager (see Section 12, page 81).
☐ The BLUETOOTH connection between the SMA devices must be possible (see Section 6.3
"Checking the BLUETOOTH Connection at the Designated Mounting Location", page 39).
Minimum clearances:
☐ The minimum clearances must be maintained to ensure adequate heat dissipation.
70 mm
Figure 13: Minimum clearances
38 HoMan-IA-en-20
SUNNY HOME MANAGER
70 mm
50 mm
SMA Solar Technology AG
Installation Manual