Retrofitting Plugwise Radio-Controlled Sockets - SMA sunny home manager Installation Manual

SMA Solar Technology AG
9.2

Retrofitting Plugwise Radio-Controlled Sockets

This section describes how to retrofit Plugwise radio-controlled sockets for your
Sunny Home Manager system if there is already at least one Plugwise radio-controlled socket
registered in the Sunny Home Manager. When retrofitting devices, observe the maximum number
of devices that can be managed by the Sunny Home Manager (see Section 2.3, page 12).
Requirement:
☐ The Plugwise Stretch must be available and commissioned.
☐ At least one Plugwise radio-controlled socket must already be registered in the
Sunny Home Manager.
Procedure:
1. Commission the Plugwise radio-controlled socket (see manufacturer's documentation).
☑ The Plugwise radio-controlled socket is displayed in the Plugwise app.
✖ The Plugwise radio-controlled socket is not displayed in the Plugwise app?
It may be that the Plugwise radio-controlled socket is beyond the range of the Plugwise
Stretch.
• Resolve this problem (see manufacturer's documentation).
2. Call up the Sunny Home Manager system in Sunny Portal.
☑ The Plugwise radio-controlled socket will be displayed as a new device in the
Sunny Home Manager system in Sunny Portal.
3. Add the Plugwise radio-controlled socket to the Sunny Home Manager system in Sunny Portal
and configure it (see the user manual "Sunny Home Manager in Sunny Portal"). Configuring
the Plugwise radio-controlled sockets is no different to configuring the SMA radio-controlled
sockets.
Installation Manual
9 Retrofitting Devices
HoMan-IA-en-20 61