Setting The Operating Mode Of The Plugwise Radio-Controlled Socket - SMA sunny home manager Installation Manual

SMA Solar Technology AG
2. Keep tapping the touch key until the upper horizontal LED displays the desired operating
mode:
Operating mode
On
Automatic
Off
3. To adopt the operating mode, wait approximately one second. During this time, do not tap the
touch key.
☑ After approximately two seconds, the SMA radio-controlled socket audibly switches to
the selected operating mode.
8.4.2 Setting the Operating Mode of the Plugwise Radio-
Controlled Socket
You can only set the operating mode of Plugwise radio-controlled sockets that are managed by the
Sunny Home Manager via Sunny Portal or the Sunny Portal app (see the user manual "Sunny
Home Manager in Sunny Portal").
Plugwise radio-controlled sockets that are managed by the Sunny Home Manager can not be
configured via the Plugwise app. Only the data of these Plugwise radio-controlled sockets will be
displayed. If you would like to manage certain Plugwise radio-controlled sockets via the Plugwise
app, you must remove the desired Plugwise radio-controlled sockets from your
Sunny Home Manager system (see the user manual "Sunny Home Manager in Sunny Portal".
Installation Manual
LED status
Glowing green
Off (subsequently flashing orange)
Glowing orange
HoMan-IA-en-20
8 Commissioning
59