Noise And Vibration - Flex LW 1202 Original Operating Instructions

Noise and Vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
LW 1202/~S
LW 1503/~S
LW 1703/~S
LW 802 VR/~S
Total vibration value (3-axis) when grinding
natural stone with corundum grinding rings
(LW 1202/~S, LW 802 VR/~S) or with Velcro
diamond wheels (LW 1503/~S, LW 1703/~S):
LW 1202/~S
LW 1503/~S
LW 1703/~S
LW 802 VR/~S
* If the FLEX rubber coupling 240.338 is used,
the value is reduced to 3.6 m/s².
16
89.3 100.3
91.4 102.4
89.4 100.4
89.9 100.8
a [m/s²]
h
6.7 * –
– 3.1
– 3.0
4.9 * –
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=~åÇ=
îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
The vibration emission level given in this infor-
mation sheet has been measured in accor-
dance with a standardised test given in
EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool.
However if the tool is used for different appli-
cations, with different accessories or poorly
3
maintained, the vibration emission may differ.
This may significantly increase the exposure
3
level over the total working period For a precise
estimation of the vibration load the times should
3
also be considered during which the power tool
is switched off or even running, but not actually
3
in use.
This may significantly increase the exposure
level over the total working period Identify addi-
tional safety measures to protect the operator
from the effects of vibration such as: maintain
the tool and the accessories, keep the hands
warm, organisation of work patterns.
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK
1.5
1.5
1.5
3.0
`^rqflk>
klqb
`^rqflk>
Wet stone grinder