BMW R1200GS Rider's Manual page 83

justment in the alignment 1
(identification L).
In order to set the high seat
position, install front height
adjustment in the direction 2
(identification H).
Initially push front height ad-
justment under the mount-
ings 1, subsequently press into
the locking mechanism 2 until
the same engages.
In order to set the low seat po-
sition, swivel rear height adjust-
ment 1 into position 3 (identi-
fication L).
In order to set the high seat
position, swivel rear height
adjustment 1 into position 2
(identification H).
If the seat tilt is to be changed:
Position front and rear height
adjustment differently.
Installing front seat
Removing rear seat (
Adjust the height and angle of
tilt of front seat ( 80).
Set rider's seat into the mount-
ings 1 left and right, and place
loosely on the motorcycle.
Press the rider's seat slightly
forward in its rear area and
then firmly down until the lock-
ing mechanism engages.
79).
4
81
z