Replacing bulbs for front
7
and rear turn indicators
without LED turn indicators
130
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
z
Remove screw 1.
OE
Pull the glass out of the light
housing at the threaded-
fastener side.
Turn bulb 1 counter-clockwise
and remove it from the light
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED turn indicators
LED
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of foreign matter.
OE
OE