Riding Mode - BMW R1200GS Rider's Manual

Press and hold down button 1
until the ASC warning light
changes status.
You have the option of de-
activating the ASC function
while the motorcycle is on the
move.
The ASC warning light
shows.
Release button 1 within two
seconds.
The ASC warning light still
shows.
The ASC function is deactiv-
ated.
Activating the ASC
function
Press and hold down button 1
until the ASC warning light
changes status.
The ASC warning light
goes out; if self-diagnosis
has not completed the warning
light starts flashing.
Release button 1 within two
seconds.
The ASC warning light still
does not show or continues
to flash.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
See the section entitled
"Engineering details"
for more information on
BMW Motorrad Automatic
Stability Control (ASC).

Riding mode

Using the riding modes
BMW Motorrad has developed
5 operational scenarios for your
motorcycle from which you can
select the scenario suitable for
your situation:
4
65
z