Removing Front Wheel - BMW R1200GS Rider's Manual

units can be changed to suit the
7
new wheel sizes.
120 RDC label
with tyre pressure monitoring
(RDC) OE
z
Incorrect tyre fitting can
damage the RDC sensors.
Be sure to explain to the au-
thorised BMW Motorrad dealer
or the specialist workshop that
the wheel is fitted with an RDC
sensor.
If the motorcycle is equipped
with RDC, each wheel rim bears
an adhesive label indicating the
position of the RDC sensor.
When changing the tyre, take
care not to damage the RDC
sensor. Be sure to draw the
attention of the authorised
BMW Motorrad dealer or
specialist workshop to the fact
that the wheel is fitted with an
RDC sensor.

Removing front wheel

Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Disengage the cable for the
wheel-speed sensor from re-
taining clips 1 and 2.
Remove screw 3 and remove
the wheel-speed sensor from
its bore.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back