BMW R1200GS Rider's Manual page 139

Disconnect battery negative
lead 1 and remove the battery.
If the 12V battery is not
correctly installed or if the
polarity of the terminals is re-
versed (e.g. in an attempt to
jump-start the vehicle), this can
cause the fuse for the alternator
regulator to blow.
Secure battery positive lead 1.
Push battery into the mounting.
First insert retaining plate into
the mountings 1 and then push
under the battery in position 2.
Secure battery negative lead 1.
Secure the battery with rubber
strap 2.
Place battery cover into the
mounting 1 and press into the
mountings 2.
7
137
z