About The Battery; Charge The Battery - Honeywell DOLPHIN CT50 User Manual

Chapter 1 — About the Computer Features

About the Battery

Charge the Battery

6 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
The CT50 uses a rechargeable 3.6 Vdc Li-ion battery as its main power
source. The battery has a 14.6 watt-hour capacity. Several factors
determine the life of your battery, such as display brightness, display
timeout, input device, extreme temperature, and your usage.
Honeywell recommends that you keep the battery charged at all times to
prevent data loss. When you change the battery, the computer
automatically goes into a power-off state.
Contact your local sales representative for replacement batteries.
Caution: The battery used in this device may present a fire or
chemical burn hazard if it is mistreated. Do not disassemble it, heat
it above 100 °C (212 °F), or incinerate it. Dispose of used batteries
promptly. Keep away from children.
Caution: We recommend the use of Honeywell Li-ion battery packs.
The use of any non-Honeywell battery may result in damage not
covered by the warranty.
Make sure you fully charge the battery (Model CT50-BTSC) before you
use your CT50. You can charge the battery before or after you install it in
the CT50. It takes about 6 hours for the battery to fully charge in any of
the accessories.
• Insert the battery into a Quad Battery Charger or the battery well of
an eHomeBase.
or
• Insert the CT50 with the battery installed into an eHomeBase,
ChargeBase, NetBase, Quad Battery Charger, USB Adapter, or
Vehicle Power Adapter.