Download  Print this page

Use Gloves With The Touch Screen; About The Good Read Led - Honeywell DOLPHIN CT50 User Manual

Hide thumbs


Chapter 1 — About the Computer Features

Use Gloves with the Touch Screen

About the Good Read LED

Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
You can use many off-the-shelf gloves, including leather, when operating
the touch screen on the computer. The gloves can be up to 2 mm (0.08
inches) thick. Use this procedure to set the touch screen to "glove mode."
1 Press the flat part of the gloved finger to the touch screen.
You want to have approximately 13 mm (0.51 inch) surface area
touching the screen, almost as if taking a fingerprint.
2 Tap the screen subsequently to use it with your gloved hands.
3 Exit "glove mode" by tapping the screen with your bare finger.
The Good Read LED indicates the status of the scanner. For more
information on how to scan bar codes, see
Good Read LED
Good Read LED Descriptions
LED Color
Good read of a bar code.
Blinking green
The data collection engine is processing or starting up.
"Scan a Bar Code" on


   Also See for Honeywell DOLPHIN CT50

   Related Manuals for Honeywell DOLPHIN CT50

Comments to this Manuals

Symbols: 0
Latest comments: