Chapter 3 — About the Scanner
HONWedge Profile Commands (continued)
WEDGE_POWER_TIMEOUT Use this command to optimize scan
Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
performance or to save power.
The WEDGE_POWER_TIMEOUT defaults to
30 ms. After 30 seconds of inactivity, the
scan acquisition system enters a low power
state. Press the scan button to exit the low
power state and power up the scan
The timeout value is set using the
command. The units are milliseconds.
Adds a prefix to the start of the bar code
Adds a suffix at the end of the data to bar
Inserts a delay between bar codes when
wedging the bar code data into the keyboard
buffer. A delay of ENTER_DELAY is inserted
whenever the Wedge encounters a carriage
return, line feed, or tab key. The units for
ENTER_DELAY are milliseconds.
Some applications, such as Excel, may
require additional processing time when
advancing to the next input field. Without a
delay, data may arrive faster than the
application can process the data. You can
use the POSTAMBLE command to add a line
feed at the end of each bar code.