Change How Data Packets Are Routed; How To Restart The Computer - Honeywell DOLPHIN CT50 User Manual

Chapter 7 — Manage and Maintain the CT50

Change How Data Packets are Routed

How to Restart the Computer

70 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
The Route app allows you to view and edit the rules that govern how
packets destined for various subnets are routed. These rules tell the
computer which gateways, on a given subnet, may be used to route
packets to hosts on other subnets. You can add, delete, clear, or print a
route. This procedure explains how to add a route.
1 Tap All Apps > Route.
2 Type the range of IP addresses to which this rule will apply in the
Destination and Netmask fields.
3 Type the Gateway.
4 (Optional) Type the Metric.
5 (Optional) Type the Interface.
6 Tap Execute. The system verifies your results and the Output screen
lets you know if your entry was added successfully.
If the computer or an application locks up, or if the computer does not
respond when you press the Power button, you may need to restart the
computer.
The computer uses the configuration currently saved in flash memory
during the boot process. Try these methods, in order, to restart the
computer:
• Restart: Restarts the computer and goes through the initialization
process.
• Clean boot: Completely erases the computer memory, including all
applications and data files, except those found in any removable
storage.
• Reset to factory settings: Returns the computer to the factory
default state.