Adding Shot Marks To Clips; Clearing The Thumbnail Screen; Direct Shooting Functions - Panasonic AG-HVX200P Operating Instructions Manual

Thumbnail screen (continued)

Adding shot marks to clips

Adding shot marks (
the clips you are looking for.
1
Press the and
yellow frame to the clip to which you will
add a shot mark.
2
Press the USER button to which the shot
mark function has been allocated. (Page
104)
To release a shot mark, repeat the above steps.

Clearing the thumbnail screen

Before performing setting menu operations (Page
96), you must clear the thumbnail screen.
Release this in the same way when the camera-
recorder is to be controlled from a nonlinear editor.
1
Press the AUDIO DUB/THUMBNAIL button.
AUDIO DUB AUDIO DUB
/THUMBNAIL /THUMBNAIL
The normal playback standby screen (1394 input
mode) appears.

Direct shooting functions

If you press the START/STOP button (red) in MCR
mode, the camera mode will be automatically
activated, and shooting will start.
66
) will make it easier to fi nd
M
buttons to move the
P2