Native Recording; Standard Recording - Panasonic AG-HVX200P Operating Instructions Manual

Panasonic memory card camera-recorder operating instructions ag-hvx200p
Hide thumbs Also See for AG-HVX200P:
Table of Contents

Advertisement

Native recording

1
Using the REC FORMAT (P2) function
(page 106) on the RECORDING SETUP
screen, select 720/30PN or 720/24PN as the
recording format
2
Select the appropriate scene fi le using the
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
register the scene fi le. (page 54)
3
Using the OPERATION TYPE function (page
100) on the SCENE FILE screen, select FILM
CAM, and set the desired recording frame
rate using the FRAME RATE function (page
100).
4
Press the START/STOP button to start or
stop native recording in VFR mode.
• No signals are output from the 1394 terminal
during recording or recording standby in the
native mode.
• Sound is not recorded. However, sound will be
recorded when the same frame rate is used
for both recording and playback.
• When a recorded clip lasting a long time
is to be played back and imported using
a nonlinear editing system that supports
Varicams, the UB MODE option on the
RECORDING SETUP screen must be set to
FRM.RATE.
• If the effective frame information is to be
carried over when recording onto this camera-
recorder from a nonlinear editing system that
supports Varicams, the 1394 UB REGEN
option on the RECORDING SETUP screen
must be set to ON.
• After editing, materials are output from the
nonlinear editing system in 1080i/24P or
720P/60P (24P over 60P) format.
There may be slight discrepancies between the recording frame rate displayed and the frame rate at which
the images are actually recorded. Refer to the table below.
Recording frame
rate displayed
Frame rate at which
images are actually
59.94 48.17 35.68 32.11 29.97 26.44 23.98 22.48 19.55 17.98 12.26
recorded
60
48
36
32

Standard recording

1
Using the REC FORMAT (P2) function (page
106) on the RECORDING SETUP screen,
select 720P/60P, 720P/30P or 720P/24P as
the recording format
2
Select the appropriate scene fi le using the
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
register the scene fi le. (page 54)
3
Using the OPERATION TYPE function (page
100) on the SCENE FILE screen, select FILM
CAM, and set the desired recording frame
rate using the FRAME RATE function (page
100).
4
Press the START/STOP button to start or
stop standard recording in VFR mode.
• Sound is recorded.
• In the case of a nonlinear editing system that
supports Varicams equipped with an effective
frame extraction function, you can upload
even undercrank or overcrank shooting
materials as is. (The UB MODE option on the
RECORDING SETUP screen must be set to
FRM.RATE.)
• After editing, materials are output from the
nonlinear editing system in 1080i/24P or
720P/60P (24P over 60P) format.
• The 24P format is used for 2:3 pull-down
recording; the 30P format is used for 2:2 pull-
down recording.
30
26
24
22
P2
20
18
12
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvx200a - camcorder - 1080p

Table of Contents