Using Scene Fi Les; Changing Scene Fi Le Settings - Panasonic AG-HVX200P Operating Instructions Manual

Using scene fi les
The settings according to the variety of shooting
circumstances are stored in each position of scene
fi le dial.
When shooting, you can retrieve the necessary fi le
instantly using scene fi le dial.
• During recording, the OPERATION TYPE and
FRAME RATE (page 100) settings remain
unchanged even when the scene fi le is changed.
To change these settings, set the camera-
recorder to recording standby state.
When the camera-recorder is shipped from the
factory, the following fi les are stored.
F1: SCENE
File suitable for normal shooting.
F2: SCENE FLUO.
File suitable for shooting under fl uorescent lights,
ie. indoors.
F3: SCENE SPARK
File suitable for making subjects sharper, such as
at weddings.
F4: SCENE B-STR
File for broadening the contrast of dark parts,
such as when shooting sunsets.
F5: SCENE CINE V
File suitable for shooting movie-like scenes
where the contrast is to be emphasized. (The
recording format remains unchanged even when
the scene fi le is changed. It must be set using
the REC FORMAT option on the RECORDING
SETUP screen. (Page 106))
F6: SCENE CINE D
File suitable for shooting movie-like scenes
where the dynamic range is to be emphasized.
(The recording format remains unchanged
even when the scene fi le is changed. It must
be set using the REC FORMAT option on the
RECORDING SETUP screen. (Page 106))
54
Scene fi le dial
Changing scene fi le settings
The setting value of the scene fi le can be changed.
Also you can save the changed scene fi le to each
position of the scene fi le dial.
Example: Change the name of the scene fi le.
1
Set the POWER switch to ON.
2
Turn the scene fi le dial, then select the
scene fi le to be changed.
3
In the setup menus, select the SCENE FILE
screen.
• For menu operation (Page 96)
• You can also use the menu buttons on the
remote control. (Page 15)
4
Press and button to select NAME EDIT.
5
Press (or ) button, and use
select YES.
Press button.
button to