Usb And Sd/Ms/Mmc Card Function - Teac LCDV1001 User Manual

USB and SD/MS/MMC Card Function

Preparation:
1. Connect the unit with the electrical power.
2. Switch the power to ON.
3. Insert the USB into the unit's USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the sides of the unit. Please see the right figure:
4. In DVD mode, press it and hlod it for a longer time to shift among DVD, SD/MS/MMC and USB
modes.
Make sure that files of JPEG or WMA format are stored in the USB and SD/MS/MMC card
before connection.
5. Press the DVD/SD/USB button to shift among disc playback, SD/MS/MMC playback and the
USB playback. The default state is disk playback. Please see the below figure:
6. Press the ∧∨ button to select the folder, and press ENT button to enter.
7. Press ∧∨ button to select the desired track. Then press the
8. Press button to stop playback. Then press the
beginning of the current track. Press the ＜ button to return to the folder menu.
Note:
1. Pull out the USB or SD/MS/MMC card directly after the JPEG or WMA format files are played.
Then the unit will be in the state of disc playback again.
00:00 00:00
001/002
BAK
JPEG
25
button to start playback.
button, the playback will start from the