Related Manuals for Teac LCDV2657DVR
Summary of Contents for Teac LCDV2657DVR
- Page 1 Product Image to be inserted USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN www.teac.com.au...
-
Page 4: Table Of Contents
Table Of Contents Important Safety Instructions..........................2 View of Unit ................................. 4 Left Side Panel ....................................4 Front Panel......................................5 Rear Panel......................................6 Special Feature of DVD Module ......................... 7 Disc Information..............................8 Remote Control ..............................9 Remote Control Drawing................................9 Preparation of Remote Control............................... 12 Using of Remote control ................................ -
Page 5: Important Safety Instructions
Important Safety Instructions This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit. This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance. Caution: Laser radiation when open. Do not stare into beam. Caution: use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. - Page 6 Important Safety Instructions NOTES: IMPORTANT FOR LASER PRODUCTS Read these instructions. 1. CLASS 1 LASER PRODUCT Keep these instructions. 2. DANGER: Visible laser radiation when open and Heed all warnings. interlock failed or defeated. Avoid direct exposure to Follow all instructions. beam.
-
Page 7: View Of Unit
View of Unit Left Side Panel EJECT button Press to eject the disc from the unit. 2. ■ STOP button Press to stop disc playback in DVD mode. PLAY/PAUSE button Press to start disc playback and press it again to pause playback in DVD mode . 4. -
Page 8: Front Panel
View of Unit 8. MENU button Tap this button to enter the system setup menu. 9. CH buttons In ATV or DTV mode, tap this button to select channels; On system setup menu, the same function as ▲/▼ direction buttons. 10. -
Page 9: Rear Panel
View of Unit Rear Panel 1. AV2/S-VIDEO Input Jacks 7. Y/Pb/Pr (Component) and L/R audio Input Connect Composite/S-Video signal source in Jacks Composite 2 or S-Video mode. Connect the Y/Pb/Pr (Component) signal Composite 2and S-Video share L/R audio source in Component mode. jacks. -
Page 10: Special Feature Of Dvd Module
Special Feature of DVD Module Your TV comes equipped with a removable DVD module. Please follow the procedures below to remove or install the DVD module. Note: Before removing or installing the DVD module, ensure that the television is unplugged and turned off. DVD module removal: Refer to the illustration below and follow the procedures below to remove the DVD module from the unit:... -
Page 11: Disc Information
Disc Information Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) Audio + Video 12cm (active picture) 266min(DS-SL) 484min(DS-DL) Audio 12cm 74min JPEG Still high resolution 12cm Video 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. -
Page 12: Remote Control
Remote Control Remote Control Drawing 2. DTV button Press to enter DTV mode. 3. SOUND button Press to select the screen picture mode: choose from Standard, User, Sports, Movie or Music. 4. TV.RADIO button Press to select DTV program playback or Radio program playback in DTV mode. - Page 13 Remote Control 11. AUDIO button 23. DVR.LIST button In DVD mode, press to select the audio Press to display the recorded file list. language or audio track. 24. ATV button In teletext mode, press once to display the Press to select ATV mode. concealed information, such as solution of 25.
- Page 14 Remote Control Remote Control Drawing In teletext mode, press to select four groups of 3-digit numbers that are displayed in different colors at the bottom of the screen. Press the colour buttons on the remote control to select, then use the number buttons to input the corresponding number to display the page.
-
Page 15: Preparation Of Remote Control
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery Point the remote control unit from no more than compartment. about 7 meters from the remote control sensor and within about 60 degrees of the front of the unit. -
Page 16: System Connections
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color code when connecting audio and video cables. Connecting to the Power Supply Connect the power supply cord to the wall AC outlet, see the figure below. Connecting to an External AV Signal Source(AV2/S-Video) Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel of the unit. -
Page 17: Connecting To An External Av Signal Source (Av1)
System Connections Connecting to an External AV Signal Source (AV1) Use AV cables to connect an external AV signal source to the AV input jacks on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source. Press INPUT then direction buttons to select Composite 1 mode, and then press the ENTER button to confirm. -
Page 18: Connecting To An External Av Signal Source (Ypbpr)
System Connections Connecting to an External AV Signal Source (YPbPr) Use AV cables to connect an external AV signal source to the Y/Pb/Pr (Component) input jacks on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source. Press INPUT then direction buttons to select Component mode, and then press the ENTER button to confirm. -
Page 19: Connecting To An External Av Signal Source(Hdmi)
System Connections Connecting to an External AV Signal Source(HDMI) Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source. Press INPUT then direction buttons to select HDMI 1 or HDMI 2 mode, and then press the ENTER button to confirm. -
Page 20: Connecting To A Pc
System Connections Connecting to a PC Follow the steps and figure below to connect PC to the unit. Connect one end of the VGA cable to the VGA input jack on the jack panel of the unit and the other end to the PC VGA output. -
Page 21: Connecting To An External Av Signal Source(Av Output)
System Connections Connecting to an External AV Signal Source(AV Output) Use the AV cables to connect the external AV input device to the AV output jacks on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source. Press INPUT then direction buttons to select the corresponding mode, and then press the ENTER button to confirm. -
Page 22: Connecting A Usb Device
System Connections Connecting a USB Device This unit is designed with a USB port so that you can connect your USB device and use the build in record function. It is also used for software upgrade. See figure below: Please use a USB connector to connect the external USB device to the USB port on the unit. Make sure that Software file for upgrade is stored in the USB device before connection. -
Page 23: Input Source Selecting
Input Source Selecting The unit incorporates multiple input sources which can be selected via the Input button on the television or remote. Press the INPUT button to enter Input menu. The screen will display as shown below: Use the ▲▼direction buttons and ENTER button On the input menu, press the ▲▼... -
Page 24: Tv Operation And System Setup
TV Operation and System Setup Preparations After connection, press the POWER button to turn on the unit. Press the INPUT button to select ATV or DTV mode and you can then conduct the following operations: Note: In other mode, you can refer to the following instructions in DTV or ATV mode to go on with some settings. -
Page 25: Channel Setting
TV Operation and System Setup If you use the unit for the first time or if your setup has changed, you can setup the unit from Channel Setup menu. Please follow the instructions below: Channel Setting Press the MENU button once to enter CHANNEL setup menu as shown on the right. - Page 26 TV Operation and System Setup DTV Manual Tuning Press the ▲▼ button to select DTV Manual Tuning and press the ENTER or ► button, the screen will display as shown on the right: Press the ◄► button to select desired channel number and press the ENTER button to start tuning.
-
Page 27: Picture Setting
TV Operation and System Setup Rename a channel: (this function is only available for ATV channels) Press the ▲▼ button to select a channel you want to rename and press the green button to set a ” on the channel. Press the ◄► button to highlight the character position of channel symbol “... - Page 28 TV Operation and System Setup Brightness Press the ▲▼ button to select Brightness and press the ◄► or ENTER button to enter the brightness adjusting bar. Press the ◄► button to darken or brighten the picture. Color Press the ▲▼ button to select Color and press the ◄► or ENTER button to enter the color adjusting bar.
- Page 29 TV Operation and System Setup Blue Press the ▲▼ button to select Blue and press the ◄► or ENTER button to enter the adjusting bar. Press the ◄► button to select adjust the level. Note: The items Red, Green and Blue are only available when Color Temperature is set to User. Within the adjusting bar, you can select Red, Green and Blue by pressing the ▲▼...
-
Page 30: Sound Setting
TV Operation and System Setup Sound Setting Press the MENU button once to enter CHANNEL setup menu and press the ▲▼ button to select SOUND, the screen will display as shown. Press the ENTER or ► button to enter the menu. In the SOUND setup menu, press the ▲▼... -
Page 31: Time Setting
TV Operation and System Setup Surround Sound Press the ▲▼ button to select Surround Sound and press the ◄► button to select Off, SRS TruSurround XT or Surround. Surround Mode Press the ▲▼ button to select Surround Mode and press the ► or ENTER button to enter the sub menu as shown: Within the sub menu, press the ▲▼... -
Page 32: Option Setting
TV Operation and System Setup Off Time Press the ▲▼ button to select Off Time and press the ENTER or ► button to prompt a information box, as shown: Press the ▲▼ button to select Repeat, Hour or Minute, press the ◄► button to set. Press the ENTER button to confirm after selecting Close. - Page 33 TV Operation and System Setup Audio Language Press the ▲▼ button to select Audio Language and press the ENTER or ► button to prompt a information box, as shown: Press the ▲▼ button to select Primary or Secondary, press the ◄► button to select desired language. Press the ENTER button to confirm before selecting Close.
- Page 34 TV Operation and System Setup OSD Time Out This item is used to set the duration of the OSD on the screen. Press the ▲▼ button to select OSD Time Out and press the ◄► button to select desired time. DVR File System Press the ▲▼...
- Page 35 TV Operation and System Setup During disk formatting, please do not unplug the USB device and wait for several minutes. NOTES: We cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit.
- Page 36 TV Operation and System Setup System Update Time Set the time when the system update automatically in standby mode. Press the ▲▼ button to select System Update Time and press the ► or ENTER button to prompt an information box, as shown: Within the sub menu, press the ▲▼...
-
Page 37: Dvr Function
DVR Function In DTV Mode Only DVR function allows the unit to record live DTV program and make it available for reviewing at any time. NOTE: When DVR function is in progress, please don’t unplug the power and the external USB device at will. When DVR function is active, the power indicator will blink with red and blue consecutively. -
Page 38: Recording Program
DVR Function While in Time Shift mode, below operations can be use. Press the button repeatedly to increases the fast forward/rewind speed. Press the button to jump about 30 seconds forward. Press the button to jump about 30 seconds backward. Press the button to once to set the beginning point “A”... -
Page 39: Playing Recorded Program
DVR Function Playing recorded program You can play the selected program in the recorded list. Press the DVR.LIST button on the remote control to enter the Recorded List, as shown: Press the DVR.LIST button repeatedly to list the files by named Program, Channel or Time. -
Page 40: Schedule Recording
DVR Function Schedule Recording Schedule record is a function which allows you to record future program. You can first set up a schedule record, then unit will record the program when the program is broadcast. It will stop recording when the program finish. - Page 41 DVR Function Use the ▲▼ button to select desired item and press the ENTER button to enter. Program Select a program. Set a date to start recording in the future. Start Date The start date should be later than the current date. Set a time to start recording in the future.
-
Page 42: Epg Function
EPG Function In DTV Mode Only This system has an Electronic Program Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as program listings, start and end times for all available services. In addition, the detailed information about the program is often available in the EPG (the availability and amount of these program details will vary, depending on the particular broadcaster). - Page 43 EPG Function To schedule a program reminder Select a program on the PROGRAM GUIDE menu then press the blue button to enter the Reminder menu, as shown on the right: If you want to adjust any of the settings, press the ▲▼ button to select desired item and press the ◄►...
-
Page 44: Nicam Function
NICAM Function The unit supports NICAM function when in TV mode. Under NICAM TV broadcast: When receiving stereo audio signals, press the STEREO button on the remote control repeatedly to select the sound tracks between NICAM STEREO and Mono and the screen will show the corresponding display as shown below: When receiving bilingual audio signals, press the STEREO button on the remote control repeatedly to shift the sound tracks between NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II and Mono... -
Page 45: Dvd Playback Operation
DVD Playback Operation Preparation Connect the unit to the power supply and press the POWER button to turn on the unit. Repeatedly press the INPUT button on the remote control to select DVD mode and press the ENTER button to enter. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot until about half of the disc is in the tray and then the disc will be drawn into the disc tray and loaded automatically. - Page 46 DVD Playback Operation Previous and Next Press the button to go to the next chapter. Press the button once to return to the beginning of the current chapter or track; press it twice to go to the previous chapter. Fast Playback During playback, press the button to activate fast backward or forward playback.
-
Page 47: Cd Playback
DVD Playback Operation CD Playback The player will play all tracks on a CD disc by default. You can use the buttons, or number buttons to select a track. Stop Press the ■ STOP button once to stop playback and press the ► PLAY button to resume normal playback. Press the ■... -
Page 48: Jpeg Playback
DVD Playback Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD”... -
Page 49: Divx Playback
DVD Playback Operation DIVX Playback DIVX is the name of a revolutionary new video code, which is based on the new DIVX compression standard for video. Load a DIVX disc in the disc tray, the player will enter the reading mode. The screen displays the root menu. -
Page 50: Usb And Sd/Ms/Mmc Card Function
DVD Playback Operation USB and SD/MS/MMC Card Function In DVD mode, connect USB device to the USB port or insert SD/MS/MMC card into the SD/MS/MMC card slot on the left side of the unit. Make sure that files are stored in the USB and SD/MS/MMC card before connection. When you turn on the unit, the media select menu will appear on the screen, as shown on the right: This menu also appears when pressing the CARD button... -
Page 51: Dvd Setup Menu
DVD Setup Menu This is the place where you can arrange all important settings for the cooperation of the DVD with the TV set and other audio equipment. General Operating Steps Press the INPUT button to change to DVD mode. Press the SETUP button on the remote control, the settings menu will appear. -
Page 52: Audio Setup Page
DVD Setup Menu OSD Lang Please select preferred language for the OSD menus. Captions You can activate the captions display during playback with “On” or deactivate the display with “Off”. Screen Saver When activated, under stop mode, the unit will go into screen saver mode if the same image remains on the screen for several minutes. - Page 53 DVD Setup Menu Dolby Digital Setup: Dual Mono This function is used to set audio output. Stereo: Stereo signal output. L-Mono: Left audio channel signal output. R-Mono: Right audio channel signal output. Mix-Mono: Output of left and right mixed audio signals. Dynamic Use this function for setting the linear, dynamic compression ratio that can be used to implement various signal compression...
- Page 54 DVD Setup Menu Sharpness This menu allows the settings for the sharpness of the picture: ”High“, “Medium“ or “Low“ . Select "Low" for a soft image and "High" to improve a blurry image. Brightness and Contrast Used to set the brightness and contrast of the image to conform to the surrounding light and according to individual preferences.
- Page 55 DVD Setup Menu Audio, Subtitle and Disc Menu If a DVD contains several languages, you can choose the language for the playback, subtitles and DVD menu. Default This option is used to reset the unit. The factory settings are adopted. Notes: Resetting is only possible when the disk is removed from the DVD drive.
-
Page 56: Troubleshooting
Troubleshooting SYMPTOM CHECK ITEM Make sure the disc is loaded in. Make sure the disc is not dirty or warped. Make sure the player’s region code is the same as the region code The player cannot play. of the DVD disc. Make sure water condensation has not occurred. -
Page 57: Specifications
Specifications Model LCDV2657DVR Screen Size 26-inch TFT LCD TV Native Resolution 1366 × 768 Pixels Brightness 400 cd/m Contrast Radio 800 :1 Response time (ms) 8 ms Color System Sound System BG/I/DK Tuner VHF/UHF: 48.25~863.25MHz Antenna 75Ω VHF/UHF input Stereo... - Page 58 Specifications TV SET OUT AV output monitor Speaker Output 8 W + 8 W Power Requirement AC100 to 240V, 50/60Hz Power Consumption < 110 W Standby Power < 1 W Dimension (with stand) 667 x 235 x 500 mm (W x D x H) Net Weight About 13.5 Kg Ambient Temperature...
- Page 59 TEAC CUSTOMER SUPPORT HOTLINE (TCS) 1300 553 315 Between Monday to Friday – AEST 8.30AM to 6PM...