Channel Editing - Teac LCDV1001 User Manual

TV Operation
5. MANUAL
Press the VOL–＜/＞VOL+ button on the remote control or the ＜/＞button on the front panel
to enter the manual searching status.
6. AUTO Searching
Highlight AUTO. Press the ＞VOL+ button and then the unit will search for available TV
channels from the lowest channel to the highest channel in the standard channel list
automatically.
The unit will save the received channels in the sequence of number from 0. When all the
available channels in all bands under broadcasting are searched over and saved, the player
will go back to channel 0 automatically. You can use the ∧CH+/ ∨CH– button to select
different channels. During AUTO Searching you can press the SETUP button to stop.
If the unit cannot find any available TV channels, "NO SIGNAL" will appear on the screen.

CHANNEL EDITING

Press the EDIT button on the remote control and the menu below will display on the screen. Press
the ∧CH+/∨CH– button to highlight the item you want to setup.
1. SWAP
You can use this item to skip the channel you want to watch from the current channel directly.
Highlight SWAP. The number appears is current channel. Press the VOL–＜/＞VOL+ button to
move to where the second arrow points. Use 0-9 buttons and +10 button enter the channel you
want to watch. Press the SETUP button to confirm, and the channel will skip to the aim
channel.
2. COPY
You can use this item to copy the current channel to the aim channel, then you will obtain two
same channels, and the aim channel will be covered.
Highlight COPY. The number appears is current channel. Press the VOL–＜ or ＞VOL+ button
to move to where the arrow points. Use 0-9 buttons and +10 button enter the channel you want
to cover. Press the SETUP button to confirm.
CHANNEL EDIT
— – – – —
SWAP
— – – – —
COPY
16