Dvd System Setup - Teac LCDV1001 User Manual

DVD System Setup

Preparations
1. Connect to the power supply and turn on the unit.
2. Press the SOURCE button to select DVD mode.
3. Press the DVD SETUP button on the remote control to display the settings menu. The menu
includes General Setup Page, Speaker Setup Page, Dolby Digital Setup and Preference Page.
4. Press the ＜＞ button on the remote control to select a category. All the items in the category
will appear on the screen.
5. Press the DVD SETUP button again to exit the setup.
General Setup Page
Press the DVD SETUP button to enter the General Setup Page. The screen will display as show
below:
TV Display
Angle Mark
In the menu, use the ∧∨ button to select the
1.
desired item.
2. Press the ENT button to enter the item.
Press the ＜ button to return.
3.
1. Press the ∧∨ button to select TV Display.
2. Press the ENT button to enter.
3. Use the ∧∨ button to select items.
4. Press the ENT button again to confirm
selection and return to the previous menu.
1. Press the ∧∨ button to select Angle Mark.
2. Press the ENT button to enter.
3. Use the ∧∨ button to select On or Off.
4. Press the ENT button again to confirm
selection and return to the previous menu.
26