Usb And Sd/Ms/Mmc Card Function - Teac LCDV1901M User Manual

USB and SD/MS/MMC Card Function

USB and SD/MS/MMC Card Function
Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE button to shift to DVD mode.
4. Insert the USB into the unit's USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the below figure:
Make sure that files are stored in the USB and SD/MS/MMC card before connection.
5. Press the CARD button to shift among disc playback, USB playback and SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
6. Press the buttons to select the folder and press the ENTER button to enter.
7. Press the
playback.
8. Press the STOP
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will
be in the state of disc playback again.
3. The multi-media card reader and USB may subject to different compatibility identities due
to different brands' flash card or flash disk.
00:00
001/002
BAK
JPEG
buttons to select the desired track. Then press the PLAY
button to stop playback. Press the
00:00
button to return to the folder menu.
- 30 -
button to start