Usb And Sd/Ms/Mmc Card Function - Teac LCDV1950SD User Manual

USB and SD/MS/MMC Card Function

Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE button to shift to DVD mode.
4. Insert the USB into the unit's USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the below figure:
Make sure that files are stored in the USB and SD/MS/MMC card before connection.
5. Press the CARD button to shift among disc playback, USB playback and SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
6. Press the buttons to select the folder and press the ENTER button to enter.
7. Press the buttons to select the desired track. Then press the
playback.
8. Press the STOP button to stop playback. Press the
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will be in
the state of disc playback again.
00:00 00:00
001/002
BAK
JPEG
- 30 -
PLAY button to start
button to return to the folder menu.