Troubleshooting - Teac LCDV1001 User Manual

Troubleshooting

If you suspect there is something wrong with the unit, immediately turn the power off.
Disconnect the power connector and check that there is no smoke or excessive heat coming from
the unit. Never open or try to repair the unit yourself. There are no user serviceable parts inside.
SYMPTOM
There is no sound.
LCD is no display
The unit can't play discs.
The unit does not continue to
play discs or plays the same
section repeatedly.
There is no picture or picture
move up and down unsteady.
The remote control does not
work.
Other Notes:
Static or other external interfere may cause the unit to behave abnormally. In this occurs, unplug the
power-supply cord from the outlet and plug it in again to reset the unit. If the problems persist, then
please disconnect the power and consult a qualified technician.
Make sure system connection is correct.
Make sure the speakers are not muted.
In TV mode, set the correct sound mode.
In DVD mode, make sure disc is not dirty or warped.
Make sure the unit is turned on and the connections are
correct.
Make sure the power adapter is correctly connected.
Make sure disc is loaded in correctly.
Make sure disc is not dirty or warped.
Make sure the region code is the same as region code of DVD
disc.
Make sure water condensation has not occurred. If it occurs,
take out the disc and leave the unit on for at least one hour.
Make sure disc is not dirty or damaged.
Make sure the unit is not in any repeat status.
Check if the connections with the external AV signal source
are correct.
Correctly set the items in the picture menu.
Check if the video type input signal is not corresponding to
the unit.
Make sure the unit is turned on and in correct video type.
Make sure there are no obstructions between the remote
control and the unit.
Make sure the remote control is pointing at the unit.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
32
CHECK ITEM