Channel Setting - Teac LCDV2255HD User Manual

TV Function
If you did not use the unit for the first time or if your setup has changed, you can setup the unit from
Channel Setup menu. Please follow the instructions below:

Channel Setting

Press the MENU button once to enter
setup menu as shown on the right.
Press the ENTER button or ▼ button to enter the
menu.
In the CHANNEL setup menu, press the ▲▼
button to select the desired item. Press the MENU
button to return to the previous menu. Press the
EXIT button to exit.
Auto Tuning
Press the ▲▼ button to select Auto Tuning and
press the ENTER button, the screen will display as
shown on the right:
Press the ◄► button to select desired country and
press the ▼ button to highlight "Start". To cancel
auto tuning, press the ENTER button after highlight
"Cancel" by pressing the ◄► button.
To start auto tuning, press the ENTER button after highlighting
"Start". The screen will display as shown:
When auto tuning is over, all searched channels will be stored
automatically and it will return to the first searched channel.
During searching, press the MENU button to skip some range of
available channels. Press the EXIT button to exit.
Notes:
Channel Tuning scans the analog channels, digital channels
and Radio programs.
Please allow a few minutes for this feature to scan the entire
range of available channels to insure accurate programming of available channels.
CHANNEL
- - 20