Table of Contents
Advertisement
Installing the PCI or PCIe x16
Expansion Card
Important:
When inserting the riser
card, please select a
card within 175mm (as
shown on the next
picture).
1. The PCIe x16 slot on the motherboard is used to in-
sert a TS200-1P and TS200-1E riser card.
To install the expansion card, you need to remove the
mounting bracket and the mounting screw that secure
the bracket to the chassis and then remove the brack-
et. Put the screw and the brackets in a safe place for
later use.
Mounting screw
12
Mounting bracket
Advertisement
Table of Contents
