Table of Contents
Advertisement
lnstalling a 3.5" SATA Drive
1. Remove the 4 mounting screws that secure the drive
bay to the system.
2. Insert the spacer into the anti-shock bumper. You will
fi nd the spacers in the HDD drive bay kit that comes
with the DT122 package.
spacer
3. Place the SATA drive on the drive bay. Align the
mounting holes of the SATA drive with the mounting
holes on the drive bay.
SATA drive
Mounting screw
Drive bay
spacer
10
Mounting screw
Drive bay
Drive bay
Advertisement
Table of Contents
