Quick Install; Before You Begin - Power Measurement ION 6200 Installation Manual

Quick Install

Before You Begin

1
Options Code
1 Z0A0N
2 Z0A0P
3 Z0A0R
4 Z0B0N
5 Z0B0P
6 Z0B0R
7 A0A0N
8 A0A0P
9 A0A0R
10 A0B0N
11 A0B0P
12 A0B0R
6
This section can be used by a licensed electrician to install and perform basic
meter setup. For more detailed meter setup and use instructions, see the
"Using the Meter" section in this guide.
1. Familiarize yourself with the steps in this Quick Install section and read
the safety precautions presented on the "Installation Considerations"
page.
2. Check that you have received all the correct parts for your meter. Ensure
that you have the correct Options Card by comparing it to the following
table.
Options Card
Options Card Combinations
2
Part Number Suffix
1
This is the code number displayed on the meter Options Code screen.
2
This is the part number used to order the meter.
Part number
suffix
AOBOP
11
Options code
THIS SIDE UP
AOBOP
11
Standard Measurements
Enhanced Package #1
Enhanced Package #2
Standard Measurements, two pulse outputs
Enhanced Package #1, two pulse outputs
Enhanced Package #2, two pulse outputs
Standard Measurements, RS-485
Enhanced Package #1, RS-485
Enhanced Package #2, RS-485
Standard Measurements, two pulse outputs, RS-485
Enhanced Package #1, two pulse outputs, RS-485
Enhanced Package #2, two pulse outputs, RS-485
Description