Beacon Setting; Sbas Setting - JRC JMA-1030 Series Instruction Manual

7.9.3 BEACON SETTING

Set for a JRC Beacon (DGPS receiver). This setting is available only for JRC Beacon receiver (DGPS
receiver).
*AUTO: Select an optimum beacon station automatically.
Manual: You need to set the beacon frequency and baud rate by yourself.
Note: This setting is enabled when "Station Select" is set to "Manual".

7.9.4 SBAS SETTING

*AUTO: Automatically selects the SBAS satellite number.
Manual: Manually enter the SBAS satellite number.
** This setting is enabled when "Satellite Search" is set to "Manual".
Chapter 7 INITIAL SETTINGS
95