Installing Options; Order Of Option Installation; Attaching The 500-Sheet Paper Feed Unit - Ricoh MP 501SPF User Manual

Installing Options

By installing options, you can improve machine performance and expand the available features.

Order of Option Installation

When installing multiple options, the following order is recommended:
1. Attach the paper feed unit.
Attach the paper feed unit to the bottom of the machine.
You can attach up to four paper feed units. Up to 2,000 sheets of paper can be loaded.
2. Install the caster table.
3. Install the optional interface board.
Install in the slot of the machine.
Only one interface board can be installed.
4. Install the file format converter.
5. Insert SD card options.
Insert in the SD card slot of the machine.
There are two slots for SD cards.
Each slot supports different types of SD cards.
If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or
service representative.

Attaching the 500-sheet Paper Feed Unit

You can install a 500-sheet paper feed unit.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• The machine weighs approximately 28 kg (62 lb.).
• When moving the machine, use the inset grips on both sides, and lift slowly in pairs. The
machine will break or cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
Installing Options
31