Ricoh MP 501SPF User Manual page 224

11. Information for This Machine
• The default period the machine waits before entering Low Power Mode is 1 minute. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when [Energy Saver] (
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 1 minute. This default
time can be changed.
• The machine can print jobs from computers and receive faxes while in Sleep mode.
Specification
•
Reduced electrical consumption in
Low Power mode
Time of switch into Low Power mode
Time of switch out from Low Power
*1
mode
Reduced electrical consumption in
Sleep mode
Time of switch into Sleep mode
Time of switch out from Sleep mode
*1
Duplex Function
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
•
Reduced electrical consumption in
Low Power mode
Time of switch into Low Power mode
222
(mainly Europe)
*1
*1
*2
(mainly Asia)
*1
Type 1
48.0 W
1 minute
10 seconds
1.1 W
1 minute
21 seconds
Standard
Type 1
48.0 W
1 minute
) is pressed, it
Type 2
48.1 W
1 minute
10 seconds
1.1 W
1 minute
25.4 seconds
Standard
Type 2
48.1 W
1 minute