Modules; Q5: How To Configure Transparent Serial Port Application: Two Wifi Modules All Configured As Sta And Connection Through Ap - Jinan USR IOT Technology WIFI232-A User Manual

� Protocol: UDP
�
No Server/Client selection required;
�
Application IP address required: it's target device 's IP address;
�
Port ID required: 8899 (Default)
Q5: How How to to to to configure configure
Q5: Q5: How Q5: How configure transparent configure

modules

modules all modules modules all all configured all configured configured configured as
�
Network structure as below figure:
�
Module 1# Setting: ( We use USR-WIFI232-A/B/C as AP for this example)
� Works as AP mode and all default setting;
� Module 2# Setting:
� Works as STA mode;
� WAN connection type: Static IP: 10.10.100.100; --See "STA Interface Setting Page"
� Network Protocal:TCP/Server, Port ID: 8899;
� LAN IP address: 10.10.99.254 (Different net segment with WAN port);
�
Module 3# Setting:
� Works as STA mode;
� WAN connection type: Static IP: 10.10.100.101; --See "STA Interface Setting Page"
� Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Module 2#'s WAN
IP address (10.10.100.100);
� LAN IP address: 10.10.98.254 (Different net segment with WAN port);
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
Figure 64
Module Module
Module Module Network
transparent
transparent transparent serial
as as STA as STA and STA STA and and connection and
Page 86 of 93
Network Network Protocol: Protocol: UDP UDP
Network Protocol: Protocol: UDP UDP
serial port application:
serial serial port port port application: application: application: Two
connection connection through connection through AP? through through
--See "Mode Selection Page"
-- See "Application Setting Page"
--See "AP Interface Setting Page"
--See "Mode Selection Page"
-- See "Application Setting Page"
--See "AP Interface Setting Page"
http://www.usriot.com
Two WIFI
Two WIFI Two WIFI WIFI
AP? AP? AP?
tec@usr.cn