Jinan USR IOT Technology WIFI232-A User Manual page 78

Open test software USR-TCP232-Test.exe, selection of hardware attached to the computer's serial
number, this is COM1, choose 57600 baud rate, such as the WIFI module serial default baud rate,
open the serial port.
Network settings in TCP client mode, the server IP address input 10.10.100.254, this is WIFI module
default IP address, server port number 8899, this module default monitor TCP port number, click the
link to establish TCP connection,Then click the create connection.
Figure 52
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
Figure 51
" " " " CommTools CommTools" " " " Serial CommTools CommTools
" " " " TCP TCP TCP UDP UDP
TCP UDP UDPDbg
Page 78 of 93
Serial Serial Debug Serial Debug Debug Debug Tools
Dbg Dbg Dbg" " " " Tools Tools Tools Create Create Connection Connection
Tools Create Create Connection Connection
http://www.usriot.com
Tools Tools Tools
tec@usr.cn