Ethernet Setting - Jinan USR IOT Technology WIFI232-A User Manual

Notes: Notes: Notes: Notes:
Generally, Network protocols support three modes: TCP
Server. Server. Server. Server.
Besides module working as TCP Server (IP address not required in this mode). User must set the
IP address of the device which need communicate with USR-WIFI232-A/B/C module.
Also the Port ID between two sides of the communication devices must keep the same.

5.1.7 Ethernet Setting

This page is used to set Ethernet front-end ports of the module, It can be open or closed.And
also can be set to the WAN port to use, this module can be used as a secondary router, making it
easy for users to network.Specific Settings page is as follows:
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
Figure 38
Application Setting Application Application Application
Figure 39
Ethernet Ethernet Ethernet Setting Ethernet
Page 47 of 93
Setting Setting Page Setting Page Page Page
TCP TCP TCP Server Server, TCP Server Server TCP TCP TCP Client Client Client, UDP Client
Setting Setting Setting Page Page Page Page
http://www.usriot.com
UDP Client UDP UDP Client,UDP Client Client UDP UDP UDP
tec@usr.cn