Web Accessing And At+Instruction Set; Configuration Via Web Accessing; Open Web Management Interface - Jinan USR IOT Technology WIFI232-A User Manual

5 5 5 5 Web Web Web Accessing Accessing
Web Accessing Accessing and
5.1 5.1 Configuration Configuration
5.1 5.1 Configuration Configuration via
When first use USR-WIFI232-A/B/C modules, user may need some configuration. User can
connect to USR-WIFI232-A/B/C module's wireless interface with following default setting
information and configure the module through laptop.
Table 9 USR-WIFI232-A/B/C Web Access Default Setting
Parameters Parameters
Parameters Parameters
SSID
IP Address
Subnet Mask
User Name
Password

5.1.1 Open Web Management Interface

Step 1: Connect laptop to SSID "USR-WIFI232-A/B_xxxx" of USR-WIFI232-A/B/C module via
wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access "http://10.10.100.254
Step 3: Then input user name and password in the page as following and click "OK" button.
The USR-WIFI232-A/B/C web management page support English and Chinese language. User
can select language environment at the top right corner and click "Apply" button.
The main menu include five pages: "Mode Selection"," AP Interface Setting","STA Interface
Setting","Application Setting", "WEB IO"and "Device Management"
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
and and AT+instruction AT+instruction
and AT+instruction AT+instruction set
via via Web Web Accessing Accessing
via Web Web Accessing Accessing
Default Default
Default Default Setting
USR-WIFI232-A/B_xxxx
10.10.100.254
255.255.255.0
admin
admin
Figure 33
Open Open Web Web
Open Open Web Web Management
Page 43 of 93
set set
set
Setting Setting
Setting
http://10.10.100.254 http://10.10.100.254 http://10.10.100.254";
Management Management page page
Management page page
http://www.usriot.com
tec@usr.cn