At+Wakey; At+Hidessid - Jinan USR IOT Technology WIFI232-A User Manual

This Instruction only effective for USR-WIFI232-A/B/C works as AP. After USR-WIFI232-A/B/C module
boots up again, the setting will be effective. But user can set this command when module configured
as STA.
5.2.2.2.15 5.2.2.2.15 5.2.2.2.15 5.2.2.2.15

AT+WAKEY

AT+WAKEY AT+WAKEY AT+WAKEY
�
Function: Set/Query WIFI security parameters as AP;
� Format:
� Query Operation
AT+WAKEY<CR> AT+WAKEY<CR>
AT+WAKEY<CR> AT+WAKEY<CR>
+ok=<auth,encry,key><CR>< +ok=<auth,encry,key><CR><
+ok=<auth,encry,key><CR>< LF +ok=<auth,encry,key><CR><
�
Set Operation
AT+ AT+ WAKEY=< WAKEY=<
AT+ WAKEY=< AT+ WAKEY=< auth,encry,key><CR>
+ok<CR><
+ok<CR>< LF +ok<CR>< +ok<CR><
�
Parameters:
� auth: Authentication mode
�
�
�
�
encry:Encryption algorithm
�
�
�
�
�
� key: password, ASCII code, shall less than 64 bit and greater than 8bit;
This Instruction only effective for USR-WIFI232-A/B/C works as AP. After USR-WIFI232-A/B/C module
boots up again, the setting will be effective. But user can set this command when module configured
as STA.
5.2.2.2.16 5.2.2.2.16 5.2.2.2.16 5.2.2.2.16

AT+HIDESSID

AT+HIDESSID AT+HIDESSID AT+HIDESSID
�
Function: Set/Query hide AP's SSID;
�
Format:
�
Query Operation
AT+HIDSSID<CR> AT+HIDSSID<CR> AT+HIDSSID<CR> AT+HIDSSID<CR>
+ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF>
� Set Operation
AT+HIDSSID=<sta><CR> AT+HIDSSID=<sta><CR>
AT+HIDSSID=<sta><CR> AT+HIDSSID=<sta><CR>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
�
Parameters:
�
When Query,sta reply if module's SSID is hide;
�
�
�
When Set,
�
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
LF LF ><CR>< ><CR><
LF ><CR>< ><CR>< LF
auth,encry,key><CR> auth,encry,key><CR>
auth,encry,key><CR>
LF ><CR>< LF > > > > LF
LF LF ><CR>< ><CR>< LF ><CR>< LF
OPEN
SHARED
WPAPSK
NONE: When "auth=OPEN", effective;
WEP: When "auth=OPEN", effective or "SHARED", effective;
TKIP: When "auth=WPAPSK", effective;
AES:When "auth=WPAPSK", effective;
TKIPAES:When "auth=WPAPSK", effective;
On-not hide SSID
Off- hide SSID
Off-hide SSID
Page 61 of 93
LF LF > > > > LF
http://www.usriot.com
tec@usr.cn