Q2: Where To Set Wifi Module Lan Ip And Wan Ip Through Web - Jinan USR IOT Technology WIFI232-A User Manual

Q2: Q2: Where Where Where to to to to Set Set Set
Q2: Where Q2: Set WIFI
Page Page
Page Page？
�
USR-WIFI232-A/B/C Wireless LAN IP address setting see "AP Interface Setting Page" as below
Figure,
�
USR-WIFI232-A/B/C Wireless WAN IP address setting see "STA Interface Setting Page" as below
Figure, User can set WAN connection type to DHCP and STATIC IP.
Q3: Q3: How How How to to to to configure configure configure
Q3: How Q3: configure transparent
protocol) with two
protocol) with protocol) protocol) with two with two two
�
Network structure as below figure:
�
Module 1# Setting:
� Works as AP mode;
� LAN IP address: 10.10.100.254;
� Network Protocal:UDP, Port ID: 8899; Application IP address:10.10.100.100;
�
Module 2# Setting:
� Works as STA mode;
� WAN connection type: Static IP (10.10.100.100)
� Network Protocal:UDP, Port ID: 8899; Application IP address: Module 1#'s LAN IP
address (10.10.100.254);
�
LAN IP address: 10.10.99.254 (Different net segment with WAN port)
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
WIFI WIFI Module Module LAN LAN LAN IP IP IP IP and
WIFI Module Module LAN
Figure 59
Module Module Module Module LAN
Figure 60
Module Module WAN Module Module
transparent transparent
transparent serial
modules?
modules? modules? modules?
WIFI WIFI WIFI WIFI
Page 84 of 93
and and WAN WAN WAN IP IP IP IP through
and WAN
LAN LAN LAN IP IP IP IP Setting Setting Setting Setting
WAN IP IP IP IP Setting WAN WAN Setting Setting Setting
serial serial port port application application
serial port port application application (UDP
--See "Mode Selection Page"
--See "AP Interface Setting Page"
-- See "Application Setting Page"
--See "Mode Selection Page"
--See "STA Interface Setting Page"
-- See "Application Setting Page"
http://www.usriot.com
through through Web Web
through Web Web
(UDP (UDP
(UDP
tec@usr.cn