Table of Contents
Advertisement
4.4.3 USR-WIFI232-A/B/C Ethernet Interface Networking (As STA, Z-
Ver)
P C1
1 0 0M E t h
I P：1 9 2.1 6 8.1.1 0 1
GateWay：
1 9 2.1 6 8.1.1
Figure 28
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C Ethernet
For above networking, USR-WIFI232-A/B/C module works as STA（Firmware is Z-Version）,and
module configured as bridge mode. When module connect to AP, all devices connected to
module Ethernet interface will get assigned IP address from AP (For example: 192.168.1.101).For
module works as bridge mode, it can be treated as a transparent device and PC1, PC2 can
communicate without any limit. But in this networking, USR-WIFI232-A/B/C module needs assign
a static LAN IP address (For example: 192.168.1.10) if module also needs communication with
AP or configuration through web page.
4.5
4.5
4.5
4.5 WI-FI
WI-FI
WI-FI
WI-FI parameter
parameter
parameter
parameter setting
4.5.1 Auto- Frequency Function
When module works as STA, USR-WIFI232-A/B/C will adjust its wireless channel to keep the
same channel with associated AP and connect in.
When module works as AP and USR-WIFI232-A/B/C enable Auto-frequency function, then when
module boot up, it will select the best wireless channel based on surrounding environment.
4.5.2 Security
USR-WIFI232-A/B/C module supports multiple wireless encryption mechanisms, and enables to
protect the security of user's data transmission, the mechanisms include:
�
WEP
�
WPA-PSK/TKIP
�
WPA-PSK/AES
�
WPA2-PSK/TKIP
�
WPA2-PSK/AES
Jinan USR IOT Technology Limited
USR-WIFI232-A/B/C User Manual
U S R-W I F I2 3 2-
A/B/C
S T A Z-V e r
I P：
1 9 2.1 6 8.1.1 0
GateWay：
1 9 2.1 6 8.1.1
Ethernet
Ethernet
Ethernet Interface
setting
setting
setting
Page 34 of 93
A P
I P：
1 9 2.1 6 8.1.1
Interface
Interface
Networking
Networking
Interface Networking
Networking (As
http://www.usriot.com
P C2
I P：1 9 2.1 6 8.1.1 0 0
GateWay：
1 9 2.1 6 8.1.1
(As
(As
STA, , , , Z-Ver
STA
STA
Z-Ver) ) ) )
Z-Ver
Z-Ver
(As STA
tec@usr.cn
Advertisement
Table of Contents
