Configuration Example - HP A6600 Configuration Manual

To do...
17. Display the priority marking configuration.

Configuration example

Network requirements
As shown in Figure
The network is described as follows:
Host A and Host B are connected to GigabitEthernet 1/0/1 of Router.

The data server, mail server, and file server are connected to GigabitEthernet 1/0/2 of Router.

Configure priority marking on Router to satisfy the following requirements:
Traffic source
Host A, B
Host A, B
Host A, B
Figure 31 Priority marking
Host A
Host B
Configuration procedure
# Create advanced ACL 3000, and configure a rule to match packets with destination IP address
192.168.0.1.
<Router> system-view
[Router] acl number 3000
[Router-acl-adv-3000] rule permit ip destination 192.168.0.1 0
[Router-acl-adv-3000] quit
31, the enterprise network of a company interconnects hosts with servers through Router.
Destination
Data server
Mail server
File server
Internet
GE1/0/1 GE1/0/2
Router
Command...
display traffic behavior
{ system-defined | user-
defined } [ behavior-name ] [ |
{ begin | exclude | include }
regular-expression ]
Data server
192.168.0.1/24
Mail server
192.168.0.2/24
File server
192.168.0.3/24
91
Remarks
Optional.
Available in any view.
Processing priority
High
Medium
Low