Configuring Traffic Policing - HP A6600 Configuration Manual

Configuring traffic policing

Configure traffic policing in either policy approach or non-policy approach.
If traffic policing is configured in both policy approach and non-policy approach, the configuration in policy
approach takes effect.
Configuring traffic policing in policy approach
To do...
1. Enter system view.
2. Create a class and enter class
view.
3. Configure match criteria.
4. Return to system view.
5. Create a behavior and enter
behavior view.
6. Configure a traffic policing action.
7. Return to system view.
8. Create a policy and enter policy
view.
9. Associate the class with the traffic
behavior in the QoS policy.
10. Return to system view
11. Apply the
QoS policy.
NOTE:
In a QoS policy implemented by hardware, if you configure CIR or PIR in the CAR action as a value that
is not a multiple of 64, the system automatically changes the value into a multiple of 64, which is greater
than and nearest to this value. For example, if you configure the CIR as 127, the system automatically
changes it into 128.
Command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
car cir committed-information-
rate [ cbs committed-burst-size
[ ebs excess-burst-size ] ] [ pir
peak-information-rate ] [ green
action ] [ yellow action ] [ red
action ]
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
To an interface Applying the QoS policy to an
or PVC interface or PVC
Applying the QoS policy to
To online users
online users
Applying the QoS policy to a
To a VLAN
VLAN
Remarks
—
—
—
—
—
Required.


—
—
—
—
—
—
—
37
The peak-information-rate
argument is only available
when the SAP interface card
works in bridge mode.
The yellow argument is only
available when the SAP
interface card works in bridge
mode.