Configuring Cbq; Configuration Task List - HP A6600 Configuration Manual

To do...
5. Display
configuration.
Configuration example
Network requirements
1.
Configure WFQ queues on an interface and assign the scheduling weight 1, 5, 10, 20, and 10 to queue 1,
queue 3, queue 4, queue 5, and queue 6, respectively.
Configuration procedure
2.
# Enter system view.
<Sysname> system-view
# Configure WFQ queues on GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq 1 weight 1
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq 3 weight 5
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq 4 weight 10
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq 5 weight 20
[Sysname-Ethernet1GigabitEthernet1/0/1] qos wfq 6 weight 10

Configuring CBQ

CBQ is implemented through QoS policies.
When matching a packet against a QoS policy, the system:
Matches the packet against class-behavior associations in the order they are configured.

Matches the packet against the criteria in each class in the order they are configured.


Configuration task list

Complete these tasks to configured CBQ:
Defining a class

Defining a traffic behavior

Defining a QoS policy

Applying the QoS policy

the WFQ queuing
Command...
display qos wfq interface
[ interface-type interface
-number ] [ | { begin |
exclude | include } regular-
expression ]
77
Remarks
Optional.
Available in any view.