Configuration task list
To manage hardware congestion, use either of the following:
Configure queue scheduling for each queue in interface view or port group view, as described in
Per-queue hardware congestion
Configure queue scheduling in a QoS policy, as described in
Task
1. Per-queue hardware congestion
management
2. Configuring CBQ
Per-queue hardware congestion management
Configuring SP queuing
SP queuing comprises basic SP queuing and multimode SP queuing. Support for SP queuing modes depends
on your router model.
To do...
1.
Enter system view.
2.
Enter interface
view or port
group view.
3.
Configure SP queuing.
4.
Display SP queuing
configuration.
management.
Configuring SP queuing
Configure WRR queuing
Configuring WFQ queuing
Command...
system-view
Enter
interface interface-type
interface
interface-number
view
Enter port
port-group manual
group view
port-group-name
qos sp
display qos sp interface
[ interface-type interface-
number ] [ | { begin |
exclude | include } regular-
expression ]
73
Configuring
CBQ.
Remarks
Optional
Optional
Optional
Optional
Remarks
—
Use either command.
SP queuing is only applicable to Layer 2
interfaces.
Settings in interface view take effect on
the current interface. Settings in port
group view take effect on all ports in the
port group.
Required.
SP by default.
Only Layer 2 interfaces support SP.
Optional.
Available in any view.