Specifications - Accu-Scope 3078-HD Manual

MICROSCOPE SPECIFICATIONS
Optical System Greenough
Eyepieces WF10x/20mm field of view; 50 - 75mm interpupillary distance
Viewing Angle 60º
Working Distance 95mm
Magnification 8x-35x
Focusing System Large dual focusing knobs with coarse adjustment; focusing range: 90mm
Illumination Maintenance-free, 5 watt LED transmitted and incident illuminators with intensity control;
100V – 240V; bulb life approx. 25,000 hours
Dimensions 285 (L) x 355 (H) x 186 (D) mm
Warranty 5 year limited warranty for parts, labor and electronic components;
1 year warranty on LED bulbs and camera
DIGITAL SPECIFICATIONS
Camera 5 megapixel CMOS built-in camera system
Digital Output USB 2.0 PC Compatible
HDMI Port 720p High Definition output for desktop or large HD display
Integrated Slot SD (Secure Digital); 2GB SD card included
Recording Camera record push button control for image capture
®
ACCU-SCOPE
3078-HD ZOOM STEREO MICROSCOPE
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
Power Supply, Indicator Lamp
& Capture Button (Fig. 8)
Insert the SD card into the SD slot on the
microscope until a beeping sound is heard.
To start the camera module, turn on the camera
by pressing the power button on the microscope
head for 1-2 seconds; the indicated lamp will
light up after the system sounds with a beep.
To capture an image, press the Capture button.
The captured image is stored on the SD card.
Replacing the Fuse (Fig. 9)
Before replacing the fuse, turn the power switch
to "O" (Off), and unplug the power cord from the
outlet and the microscope.
Pull out the fuse base  from the fuse socket.
Remove the fuse from the fuse base and
replace with a new one. Reinstall the fuse base
into the fuse socket.
Plug the power cord into the base of the
microscope and then into a wall outlet. Turn the
power switch to "--" (On).
9