Safety Precautions - Jeanneau PRESTIGE 420S Owner's Manual

Operation:
I- Turn on the battery switches.
II- Switch on the bilge pump (Ref 4).
If the boat is equipped with an automatic bilge pump, the switch has an always-on position.
Bilge pump no. 3 (Engine compartment) is connected directly to the batteries.
Bilge pump maintenance
Please refer to the manufacturer's notes on the instructions for checking and maintaining the
bilge pumps.
- The drainage system is not designed to control water coming from breaches
in the hull.
- Keep the water level in the bilges to the minimum.
- Never store anything right at the bottom of the boat: Allow bilge water to flow
freely down to the lowest point of the boat.
- Check that each bilge pump is working at regular intervals.
- Clear the bilge pump points or strainers of any debris that could clog them.
- If the watertight partitions which seal off the fore and aft points are fitted with valves they
must be closed at all times and only opened to drain water into the main bilge.

SAFETY PRECAUTIONS

- 36 -
165593
Index A