Siemens hb21ab520e Instruction Manual page 22

Reassembly
In doors with three glass panels, the following step will
also be necessary:
4.
Remove the glass panel. (Figure C)
C
Clean the glass panels using a glass cleaning product
and a soft cloth.
Do not use abrasive or corrosive cleaning products,
glass scrapers, or hard metal scourers, as these could
damage the glass.
Follow steps 2 to 4 with doors that have two glass
panels.
1.
Insert the glass panel by tilting it backwards.
(Figure A)
Check that the words "Right above" are on the top
on the right-hand side.
A
2.
Insert the top glass panel by tilting it backwards.
Ensure that its smooth surface is facing outwards.
3.
Fit and tighten the screws on the cover.
4.
Hanging the oven door.
Once the glass panels have been correctly fitted,
the oven is ready to use.
23