Basic Features - Panasonic KX-FG6550 Operating Instructions Manual

8.3 Basic features

{#}{0}{1} Setting the date and time
L Enter the date and time using the dial
keypad. See page 31 for details.
L You can also program this feature with the
handset (feature 4 on page 88).
{#}{0}{2} Setting your logo
L Enter your logo using the dial keypad. See
page 32 for details.
LINE 1:{#}{0}{3}{*} LINE 2:{#}{0}{3}{#}
Setting your fax number
L Enter your fax number using the dial keypad.
See page 34 for details.
{#}{0}{4} Printing a confirmation report
To print a confirmation report for fax transmission
results (page 55).
{1} "ON": A confirmation report will be printed
after every transmission.
{2} "OFF": Confirmation reports will not be
printed.
{3} "ERROR" (default): A confirmation report will
be printed only when fax transmission fails.
LINE 1:{#}{0}{6}{*} LINE 2:{#}{0}{6}{#}
Changing the ring setting in TAM/FAX mode
or TAM ONLY mode
To change the number of rings before the unit
answers a call in TAM/FAX mode (page 60) or
TAM ONLY mode (page 61).
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{0} "TOLL SAVER"
Note:
L You can also program this feature with the
handset (feature 0611 and feature 0612 on
page 89).
{#}{0}{7} Changing the ring setting in FAX
ONLY mode
To change the number of rings before the unit
answers a call in FAX ONLY mode.
{1} "1"
{2} "2"
{3} "3" (default)
{4} "4"
8. Programmable Features
LINE 1:{#}{1}{0}{*} LINE 2:{#}{1}{0}{#}
Changing the maximum recording time for
incoming messages
{1} "1 MIN": 1 minute
{2} "2 MIN": 2 minutes
{3} "3 MIN" (default): 3 minutes
{0} "GREETING ONLY": Only plays the greeting
message.
Note:
L If you select "GREETING ONLY" for the
line(s), the unit will answer a call with the
greeting message, and then hang up. The
unit will not record any incoming messages
for the line(s).
L You can also program this feature with the
handset (feature 0621 and feature 0622 on
page 89).
{#}{1}{1} Setting the remote operation ID
L Enter a 2-digit number (00–99).
The default ID is "11".
Note:
L You can also program this feature with the
handset (feature 063 on page 89).
{#}{1}{3} Setting the dialing mode
If you cannot make calls, change this setting
depending on your telephone line service.
{1} "PULSE": For rotary pulse dial service.
{2} "TONE" (default): For tone dial service.
Note:
L You can also program this feature with the
handset (feature 051 on page 88).
{#}{1}{6} Setting the recording paper size
{1} "LETTER" (default): Letter or legal size
paper.
{2} "A4": A4 size paper.
LINE 1:{#}{1}{7}{*} LINE 2:{#}{1}{7}{#}
Setting the ringer tone for outside calls
You can select the base unit ringer tone from one
of 8 patterns for outside calls.
{1} "TONE 1" (default for LINE 1)
{2} "TONE 2" (default for LINE 2)
{3} "TONE 3"
{4} "TONE 4"
{5} "MELODY 1"
{6} "MELODY 2"
{7} "MELODY 3"
{8} "MELODY 4"
Note:
L When selecting the ringer tone, the base unit
will ring. If the base unit ringer volume has
79