Panasonic KX-FG6550 Operating Instructions Manual page 77

L To erase all messages for the desired line(s),
select the line(s) by pressing {#}{1} (LINE
1), {#}{2} (LINE 2) or {#}{0} (LINE 1 and
LINE 2), then press {*}{5}. Memo
messages will not be erased.
{#}{1}{7} To record a greeting message for
LINE 1
{#}{2}{7} To record a greeting message for
LINE 2
{#}{0}{7} To record a greeting message for
LINE 1 and LINE 2
L After the long beep, talk for up to 16 seconds.
Press {9} to end. The new greeting message
for the selected line(s) will be played back.
{#}{1}{0} To turn OFF the AUTO ANSWER
mode for LINE 1
{#}{2}{0} To turn OFF the AUTO ANSWER
mode for LINE 2
{#}{0}{0} To turn OFF the AUTO ANSWER
mode for LINE 1 and LINE 2
L The unit hangs up and will not answer calls
for the selected line(s) until turned ON again
(page 59, 61, 75).
{#}{1}{8} To turn ON the AUTO ANSWER
mode for LINE 1
{#}{2}{8} To turn ON the AUTO ANSWER
mode for LINE 2
{#}{0}{8} To turn ON the AUTO ANSWER
mode for LINE 1 and LINE 2
L The receiving mode for the selected line(s)
will be set to FAX ONLY, TAM/FAX, or TAM
ONLY mode depending on the setting of
feature #77* and/or feature #77# (page 83).
To turn ON the AUTO ANSWER mode
1. Call LINE 1 or LINE 2 and let it ring 10 rings.
L The answering machine will temporarily
answer the call.
2. Enter the remote operation ID during the
greeting message.
L A long beep will sound, and AUTO
ANSWER mode will be turned ON for
both lines.
L When AUTO ANSWER is turned ON, the
receiving mode will be set to TAM/FAX or
TAM ONLY mode, depending on the
setting of feature #77* and feature #77#
(page 83).
If feature #77* or feature #77# is set to
FAX ONLY mode, the receiving mode will
be set to TAM/FAX mode.
3. Hang up the handset.
7. Answering Machine
75